Renova Make stoving enamel is single pack, solvent based stoving enamel specially formulated with Alkyd-amino system and highly durable pigments to give a non yellowing High gloss, hard and durable finishes. On account of below stated outstanding properties it finds applications in automobile industries, electrical appliance such as panels, fitting, industrial steel drums.


  • Good Mar Resistance
  • Excellent adhesion, flexibility and hardness
  • Resistance to Aliphatic, Aromatic solvent, Alcohols, Acetone (Direct immersion is not advisable)
  • Resistance to Dilute Chemicals and Water (Direct immersion is not advisable)
  • Easy application for in line spraying equipment syste



Finish : Smooth & Glossy
Colour : White, Black, P.O.Red, Golden Yellow
Specific gravity : Max 1.15 Kg/Ltr depending upon the colour
Solids by volume : Appro 45%
Spreading Rate : At 130. C for 30 to 40 min


Thinner: Stoving Thinner ST-222
Thinner Ratio: p to 10 %


  • The steel surface to be coated should be dry and free from surface impurities Such as grease, oil and rust.
  • Surface impurities can be removed by washing with degreasing agent or water, and should be thoroughly dried prior to coating.
  • Take care to remove heavy rusting if needed sand blast to remove rusting, and loose particles should be wiped off.

PACKING - 20, 4 ltr


Avoid contact with skin and eyes and exposure to naked light. Provide good ventilation during spraying and drying.