RENOVA THERMCOAT HT 400 is a single pack heat resistant aluminium paint based on silicone resin and leafing aluminium pigment.


  • Heat resistant up to 400.C
  • Can be used for internal and external protection of steel surfaces
  • Good anticorrosive properties
  • Dries tack free at room temperature yielding film with good mechanical resistance, weather stability and corrosion resistance.
  • Will not blister, flake, crack or peel


Finish : Smooth and Eggshell
Colour : That of Aluminium
Specific gravity : 0.96 + 0.02 @ 27 deg C
Viscosity : 25+ 5 sec / B4 @ 27 deg C
Flash point : Min 25 deg C
Touch Dry : 30 min
Curing : It is necessary to post cure by gradually and slowly elevating the temperature of the substrate up to 200 deg C for minimum one hour after touch dry to obtain optimum mechanical properties and resistance to oils and petrol
Recommended film thickness : 25 microns
Coverage : By Brushing : 20 to 25 m2 per Litre per coat
By Spray : 16 to 20 m2 per Litre per coat


Application Viscosity : As supplied if needed can be thinned as required

Thinner for mixing : ST 222

Thinner for Cleaning :ST 222

Surface condition :Clean and degreased steel

Shelf life:

6 months in original sealed containers at 27 deg C

PACKING - 20, 4 ltr


Avoid contact with skin and eyes and exposure to naked light. Provide good ventilation during spraying and drying.